YAMAHA YS Feeder Storage Cart|Feeder Trolley

YAMAHA YS Feeder Storage Cart|Feeder Trolley

Suitable for YAMAHA YS series of feeders
1.Uesd for YAMAHA
2.Material： Stainless Steel/Aluminum alloy
3.Structure：Two layers,40pcs per layer，With four metal flexible castors
4.Dimension：800x600x1100mm（L x W x H）
5.Wheel：Four Omni-directional wheel
Weight：About 23 kg


Features and Priority 
1. The feeder storage cart gives your operators a secure place to put unused feeders between set-ups minimizing failures due to improper storage or handling.
 
2. When its time to prepare for the next job, the same carts can be used to “pre-kit” the placement systems tape feeder load in positive latching feeder locations using the same numbering system as used on your placement machine.
 
3. When its time to change over to the next job, the cart is moved to the correct placement system, existing feeders on the assembler are moved to an unused shelf on the cart and the “prekitted” feeder set move from the numbered slots on the cart to the same number slot on the machine.
 
4. You can even dedicate on cart for use when removing the tape feeders from the previous job and another for the current set-up minimizing changeover time.


Features and Priority
 
1. The feeder storage cart gives your operators a secure place to put unused feeders between set-ups minimizing failures due to improper storage or handling.
 
2. When its time to prepare for the next job, the same carts can be used to “pre-kit” the placement systems tape feeder load in positive latching feeder locations using the same numbering system as used on your placement machine.
 
3. When its time to change over to the next job, the cart is moved to the correct placement system, existing feeders on the assembler are moved to an unused shelf on the cart and the “prekitted” feeder set move from the numbered slots on the cart to the same number slot on the machine.
 
4.  You can even dedicate on cart for use when removing the tape feeders from the previous job and another for the current set-up minimizing changeover time.

Panasonic CM88 feeder storage cart | feeder trolley

Panasonic CM88 feeder storage cart | feeder trolley

Product Origin: Shenzhen
Product Description: 40 / layer,total  2 layers
Material: stainless steel
Dimensions (mm): 950 * 600 * 1100
Product weight: about 24KG or so

Applicable models: Panasonic CM88 Placement machine

 

Uses: used to place .feeder, .feeder early preparation, .feeder turnover storage, improve production efficiency. Widely used in SMT production workshop .feeder turnover and placement, placed smooth, free to put, free to move or fixed.
Material: made of stainless steel, body light and durable, durable .4 3-inch universal casters, two with a brake, two activities, easy to move.
Quality: the use of advanced welding technology welding, to replace the traditional manual welding, fine section, welding without open welding, neat, hairless assassination, filled with .feeder after the frame is not deformed, the overall solid, lightweight, strong, durable.

Parameter: steel plate die made of .feeder positioning plate, and placement machine FEEDER platform, like the .feeder placement principle, to achieve a perfect four-point positioning, the top of the use of large arc, to avoid acute angle, the design is divided into upper and lower layers, .feeder installed after the sturdy and beautiful, with a grounding chain, effective anti-static.
 
feeder cart features: .feeder cart made of stainless steel processing, body firm, lightweight, durable, flexible, the whole feeder platform are used manual welding process, the installation of anti-static towline, free to move, with brake device. Up and down two layers, a total of 80 .feeder can be loaded. Widely used in SMT production workshop FEEDER turnover and placement, placed a smooth, free to put, greatly increased the work efficiency. Are made of stainless steel and aluminum production.
Storage number: a total of two, each layer placed 40 .feeder, the vehicle put a total of 80 .feeder.

(SAMIUNG), Sanyo (SANYO), Sony (SONY), Panasonic (PANASERT), the world (Universal (Universal), the United States, the United States, the United States, ), Future (FUTURITY) Philips (PHILIPS) KEM Panasonic (KME), Siemens (SIEMENS), JUKI and so on.

FUJI XP243 | QP feeder storage cart

FUJI XP243 | QP feeder storage cart

Material: stainless steel
Product Description: 35 pcs / layer * 2 layers
Overall dimensions: 1050 * 700 * 1200mm
Applicable models: Fuji FUJI XP243 / QP feeder vehicle models 

Uses: used to place feeder, feeder early preparation, feeder turnover storage, improve production efficiency. Widely used in the SMT production workshop feeder's turnover and placement, placed smooth, free to put,free to move or fixed.

Material: made of stainless steel, the body is light and durable, durable. 4 3-inch universal casters, two with a brake, two activities, easy to move;

Quality: the use of advanced welding technology welding, to replace the traditional manual welding, fine section,welding without open welding, neat, hairless assassination, filled with feeder after the frame is not deformed, the overall solid, lightweight, strong, durable ;

Technology: steel plate die made of feeder positioning plate, and placement machine FEEDER platform, like the feeder placement principle, to achieve a perfect four-point positioning, the top of the use of large arc, to avoid acute angle, the design is divided into upper and lower layers, feeder installed after the sturdy and beautiful, with a grounding chain, effective anti-static;

 

feeder vehicle features: feeder vehicles made of stainless steel processing, body firm, lightweight, durable, flexible,the overall feeder platform are used manual welding process, the installation of anti-static towline, free to move,with brake device. Points up and down two layers, a total of 70 feeder can be loaded. Widely used in the SMT production workshop FEEDER turnover and placement, placed a smooth, free to play, greatly increasing the work efficiency. Are made of stainless steel and aluminum.

The number of storage: a total of two, each layer placed 35 feeder, the vehicle put a total of 70 feeder.

JUKI electric feeder storage car

JUKI electric feeder storage cart

Technical parameters and feature
1. the main use of 40*40MM stainless steel
2. with four universal casters ( two of them with brake ), anti static chain
Each of the
3. layer may be placed 40 mechanical feeder,
4. Layer:1layer 40pcs feeder/2 layer
5. appearance specifications: Dimensions(mm):800*600*1110
6. roots of the customer requirements for customized feeder placed car
Product Description:40 / Layer, 2 Layers
 


Uses: For placing feeder,feeder preparation in advance,Feeder Turnover store,Increase productivity.
Widely used in SMT production workshop feeder turnover and placement,place smoothly,freedom
 to take put,random move or fixed.
Material:Using stainless steel material,architecture designed with high hardness square pass,the car
body is light and strong,durable.Four 3-inch casters,two with brake,two activities,convenient to move;
Quality:Using the advanced welding technology welding,replace the traditional manual welding,Cut fine,
welding without welding,neat,no burr,after  filled feeder the frame is not deformed,the whole firm,
lightweight, strong, durable;
Technology:Steel die punch made feeder positioning plate, and have the same principle with SMT
FEEDER platform placed , to achieve a perfect position, the top use large circular, to avoid an acute 
angle, the design is divided into upper and lower two layers, after installed feeder solid appearance, 
with a grounding chain, effective anti-static;
Feeder car features:Feeder car made of stainless steel processing, the body strong, lightweight, 
durable, flexible, overall  feeder placement platform are used manual welding processes , 
install anti-static towline can be moved with brakes. Upper and lower levels, can be loaded 
with a total of 80 feeder. 
Widely used in SMT production workshop FEEDER turnover and placement, placement stable, 
to take place freely, greatly increasing the work productivity. Are made of stainless steel and 
aluminum production.
 
Storage quantity: total two layers, each placed 40 feeder,  can put a total of 80  feeder.
 
Professional manufacture various types of Feeder placed car and Feeding seat,
including FUJI,YAMAHA,SAMSUNG,SANYO,SONY,PANASERT,Universal,FUTURITY,
PHILIPS,KME,SIEMENS,JUKI,I-PULSE ,Hitachi ,CASIO etc.

Panasonic CM202 feeder storage cart|KME CM202 Storage Rack trolley

Panasonic CM202 feeder storage cart|KME CM202 Storage Rack trolley

Panasonic CM202 feeder storage cart|KME CM202 Storage Rack trolley

Description:
1.Suitable for SMT workshop feeder placed, prepare feeder materials ahead of time, improve production efficiency.
2.Stainless steel welding whole, frame will never be out of shape.

Specification:
Dimension: L950 x W600 x H1100 mm
Structure:  2 layers, 40pieces per layer(With four metal flexible castors)
Material: Stainless Steel
Applied to:Panasonic CM202


1 We supply a wide range of products,and provide one- stop service for Electronic Assembly I ndustry.
2. We keep a lot of stock for and we can support small orders.
3. We can also customize the products,fulfill different requirements.
4.Gratitude: We cherish and feel gr ateful to every customer for the busines s you give us.
 We are your reliabl e partner and will return to you with good products and good support. 
5.Professional: We have been in this  business for more than 10 years. 
   We have a strong professional team with various experiences. 
6. We keep doing new product development. Our goal is to enhance our competitive capacity constantly.
7. Price: we always offer competitive prices with high qualityto  help our customers to cost down.
8. Quality: we do 100%  inspection before the shipment. 

YAMAHA CL Feeder Storage Cart / Feeder Trolle

YAMAHA CL Feeder Storage Cart / Feeder Trolley

                                                    

Suitable for YAMAHA CL series of feeders
1.Uesd for YAMAHA
2.Material： Stainless Steel/Aluminum alloy
3.Structure：Two layers,40pcs per layer，With four metal flexible castors
4.Dimension：L920*W600*H1160MM（L x W x H） 
5.Wheel：Four Omni-directional wheel
6.Weight：About 16 kg

Features and Priority 
1. The feeder storage cart gives your operators a secure place to put unused feeders between 

set-ups minimizing failures due to improper storage or handling.

 
2. When its time to prepare for the next job, the same carts can be used to “pre-kit” the placement 

systems tape feeder load in positive latching feeder locations using the same numbering system as used on your placement machine.

 
3. When its time to change over to the next job, the cart is moved to the correct placement system, 

existing feeders on the assembler are moved to an unused shelf on the cart and the “prekitted” feeder set 
move from the numbered slots on the cart to the same number slot on the machine.

 
4. You can even dedicate on cart for use when removing the tape feeders from the 

previous job and another for the current set-up minimizing changeover time.

Features and Priority
 
1. The feeder storage cart gives your operators a secure place to put unused feeders

 between set-ups minimizing failures due to improper storage or handling.

 
2. When its time to prepare for the next job, the same carts can be used to “pre-kit” the placement 

systems tape feeder load in positive latching feeder locations using the same numbering 
system as used on your placement machine.

 
3. When its time to change over to the next job, the cart is moved to the correct placement system, 

existing feeders on the assembler are moved to an unused shelf on the cart and the “prekitted” feeder set move from the numbered slots on the cart to the same number slot on the machine.

 
4.  You can even dedicate on cart for use when removing the tape feeders from the previous job and another for the current set-up minimizing changeover time.

Uses: For placing feeder,feeder preparation in advance,Feeder Turnover store,Increase productivity.

Widely used in SMT production workshop feeder turnover and placement,place smoothly,freedom to take put,random move or fixed.

Material:Using stainless steel material,architecture designed with high hardness square pass,the car

body is light and strong,durable.Four 3-inch casters,two with brake,two activities,convenient to move;

Quality:Using the advanced welding technology welding,replace the traditional manual welding,Cut fine,

welding without welding,neat,no burr,after filled feeder the frame is not deformed,the whole firm,

lightweight, strong, durable;

Samsung CP series feeder storage cart | CP feeder trolley

Samsung CP series feeder storage cart | CP feeder trolley

Product Name: Samsung CP flyer

Material: aluminum with box
Product Description: 56 / layer * 2 layers
Overall dimensions: 930 * 600 * 1170mm
Applicable models: Samsung CP models common



Uses: used to place feeder, feeder early preparation, feeder turnover storage, improve production efficiency. 

Widely used in SMT production workshop feeder

Turn and place, place a smooth, free to play, free to move, fixed.

Material: made of high quality aluminum material processing, body light and strong, durable. 4 3-inch universal 

casters, two with a brake, two live

Moving, easy to move;

Quality: the use of advanced technology from the overall assembly, to replace the traditional manual welding,

 fine section, welding without open welding, neat, hairless

Assassination, filled with feeder after the frame is not deformed, the overall solid, lightweight, strong, durable;
Technology: steel plate die made of feeder positioning plate, and placement machine FEEDER platform, like the principle of flying up to achieve the perfect four-point set

Bit, the top of the use of large arc, to avoid acute angle, the design is divided into upper and lower layers, feeder installed after the sturdy and beautiful, with a grounding chain, effective anti-static 

Electricity; 
feeder car features: feeder car made of high-quality aluminum materials from the body, solid, lightweight, durable, flexible, the whole feeder platform

Are used manual welding process, the installation of anti-static towline, can be free to move, with a brake device. Points up and down two layers, a total of 112 can be loaded feeder.

Widely used in the SMT production workshop FEEDER turnover and placement, placed a smooth, free to play, greatly increasing the work efficiency.
Storage number: a total of two, each layer placed 56 feeder, the vehicle a total of 112 feeder.

Juki KE series electronic feeder storage ca

Juki KE series electronic feeder storage cart

Product Name: 
JUKI Electric Feeder Cart (frame)|feeder storage cart

Material: stainless steel, frame with 30 * 30 stainless steel, foot 3-inch brakes with a universal wheel, easy to move;




Size | Specifications: 
L800 * W600 * H1080mm, according to the physical order;

Technology advantage : perforated steel plate made of stainless steel PIN Feida positioning panel, divided into two layers from top to bottom, cut the cutting surface accurate, connecting technology Cham, light and beautiful;

 Quality: The frame is filled with feeder is not deformed, strong, strong, durable;
 Storage quantity: 2 layers * 40 (standard car 80), can be customized according to customer needs a different number of storage;

JOY TECHNOLOGY CO.,LIMITED  can  supply feeder storage cart brands: YAMAHA, SAMSUNG, SANYO, SONY, PANASERT, Universal, FUTURITY, PHILIPS KME, SIEMENS, JUKI, Tenryn, SUZUKI etc.

YAMAHA YG100 YG200 YG300 YG12 feeder storage cart

YG100 YG200 YG300 YG12 feeder storage cart





1.For YAMAHA Feeders
2.Madeby 304 Stainless Steel
3.Two layers,40pcs per layer
4.750x600x108mm
5.With four metal flexible castor

Features and Priority

1. The feeder storage cart gives your operators a secure place to put unused feeders between 

set-ups minimizing failures due to improper storage or handling.

2. When its time to prepare for the next job, the same carts can be used to “pre-kit” the placement

 systems tape feeder load in positive latching feeder locations using the same numbering system as used on your placement machine.

3. When its time to change over to the next job, the cart is moved to the correct placement system,

 existing feeders on the assembler are moved to an unused shelf on the cart and

 the “prekitted” feeder set move from the numbered slots on the cart to the same number slot on the machine.

4. You can even dedicate on cart for use when removing the tape feeders 

from the previous job and another for the current set-up minimizing changeover time.

Panasonic CM402 feeder storage cart with electric control

Panasonic CM402 feeder storage cart with electric control





Description:
1.Suitable for SMT workshop feeder placed, prepare feeder materials ahead of time, improve production efficiency.
2.Stainless steel welding whole, frame will never be out of shape.

Specification:
Dimension: L950 x W600 x H600 mm
Structure: Only 1 layers, 40pieces per layer(With four metal flexible castors)
Material: Stainless Steel
Applied to:Panasonic CM402


1 We supply a wide range of products,and provide one- stop service for Electronic Assembly I ndustry.
2. We keep a lot of stock for and we can support small orders. 
3. We can also customize the products,fulfill different requirements.
4.Gratitude: We cherish and feel gr ateful to every customer for the busines s you give us. 

We are your reliabl e partner and will return to you with good products and good support. 

5.Professional: We have been in this  business for more than 10 years. We have a strong professional team with various experiences. 
6. We keep doing new product development. Our goal is to enhance our competitive capacity constantly.
7. Price: we always offer competitive prices with high qualityto  help our customers to cost down.  
8. Quality: we do 100%  inspection before the shipment. 

Yamaha YV88 YV100X YV112 feeder storage cart| YV88 YV100X YV112 feeder trolley

Yamaha YV88 YV100X YV112 feeder storage cart |  YV88 YV100X YV112 feeder trolley

1.For YAMAHA Feeders

2.Madeby 304 Stainless Steel

3.Two layers,40pcs per layer

4.750x600x108mm

5.With four metal flexible castor

Features and Priority

1. The feeder storage cart gives your operators a secure place to put unused feeders between set-ups minimizing failures due to improper storage or handling.

2. When its time to prepare for the next job, the same carts can be used to “pre-kit” the placement systems tape feeder load in positive latching feeder locations using the same numbering system as used on your placement machine.

3. When its time to change over to the next job, the cart is moved to the correct placement system, existing feeders on the assembler are moved to an unused shelf on the cart and the “prekitted” feeder set move from the numbered slots on the cart to the same number slot on the machine.

4. You can even dedicate on cart for use when removing the tape feeders from the previous job and another for the current set-up minimizing changeover time.

Feeder car features:Feeder car made of stainless steel processing, the body strong, lightweight, durable, flexible, overall  feeder placement platform are used manual welding processes , install anti-static towline can be moved with brakes. Upper and lower levels, can be loaded with a total of 80 feeder. 

Widely used in SMT production workshop FEEDER turnover and placement, placement stable, to take place freely, greatly increasing the work productivity. Are made of stainless steel and aluminum production.

Storage quantity: total two layers, each placed 30 feeder,  can put a total of 60  feeder.

Panasonic CM602 feeder storage cart| CM602 smt feeder trolley

Panasonic CM602 feeder storage cart | CM602 smt feeder trolley

Technical parameters and feature

1. the main use of 30*30MM stainless steel
2. with four universal casters ( two of them with brake ), anti static chain
Each of the
3. layer may be placed 30 pcs 8MM feeder,
4. Layer:1layer 30pcs feeder/2layer
5. appearance specifications: 900MM*700MM*1200MM
6. roots of the customer requirements for customized feeder placed car

Technical parameters and feature
1. the main use of 30*30MM stainless steel
2. with four universal casters ( two of them with brake ), anti static chain
Each of the
3. layer may be placed 30 pcs 8MM feeder,
4. Layer:1layer 30pcs feeder/2layer
5. appearance specifications: 900MM*700MM*1200MM
6. roots of the customer requirements for customized feeder placed cart

Uses: For placing feeder,feeder preparation in advance,Feeder Turnover store,Increase productivity.

Widely used in SMT production workshop feeder turnover and placement,place smoothly,freedom to take put,random move or fixed.

Material:Using stainless steel material,architecture designed with high hardness square pass,

the car body is light and strong,durable.Four 3-inch casters,two with brake,two activities,convenient to move，

Quality:Using the advanced welding technology welding,replace the traditional manual welding,Cut fine,
welding without welding,neat,no burr,after  filled feeder the frame is not deformed,the whole firm,
lightweight, strong, durable，

Technology:Steel die punch made feeder positioning plate, and have the same principle with SMT
FEEDER platform placed , to achieve a perfect position, the top use large circular, to avoid an acute 
angle, the design is divided into upper and lower two layers, after installed feeder solid appearance, 
with a grounding chain, effective anti-static，

Feeder car features:Feeder car made of stainless steel processing, the body strong, lightweight, 
durable, flexible, overall  feeder placement platform are used manual welding processes , 
install anti-static towline can be moved with brakes. Upper and lower levels, can be loaded 
with a total of 80 feeder. 

Widely used in SMT production workshop FEEDER turnover and placement, placement stable, 
to take place freely, greatly increasing the work productivity. Are made of stainless steel and 
aluminum production.

Panasonic CM402 Feeder Storage Cart | CM402 feeder trolley

Panasonic NPM CM402 CM 101 CM212 feeder storage cart

1.Panasonic SMT Machine feeder Cart 
2.Alluminum Alloy frame 
3. 2 layers 
4.950x600x1100mm 
5.With four metal flexible castor

Panasonic CM402  Feeder Storage Cart | CM402 feeder trolley



1. Panasonic SMT Machine Feeder cart
2.Alluminum Alloy frame 
3.Stainless Steel rack
4.950x600x1100mm
5.With four metal flexible castor  
 
Features and Priority
1. The feeder storage cart gives your operators a secure place to put unused feeders

 between set-ups minimizing failures due to improper storage or handling.

 

2. When its time to prepare for the next job, the same carts can be used to “pre-kit” the placement systems

 tape feeder load in positive latching feeder locations using the same numbering system as used on your placement machine.

 

3. When its time to change over to the next job, the cart is moved to the correct placement system,

 existing feeders on the assembler are moved to an unused shelf on the cart and the “prekitted” feeder 

set move from the numbered slots on the cart to the same number slot on the machine.

 

4.  You can even dedicate on cart for use when removing the tape feeders from the previous

 job and another for the current set-up minimizing changeover time.

 

Widely used in SMT production workshop FEEDER turnover and placement, placement stable, 
to take place freely, greatly increasing the work productivity. Are made of stainless steel and 
aluminum production.

Yamaha YS12 YS12F feeder storage cart | YS12 YS12F feeder trolley

Yamaha YS12 YS12F feeder storage cart | YS12 YS12F feeder trolley

1.For Yamaha YS SMT Feeders
2.Madeby 304 Stainless Steel
3.Two layers,40pcs per layer
4.800x600x1100mm
5.With four metal flexible castor



Features and Priority

1. The feeder storage cart gives your operators a secure place to put unused feeders between set-ups minimizing failures due to improper storage or handling.

2. When its time to prepare for the next job, the same carts can be used to “pre-kit” the placement systems tape feeder load in positive latching feeder locations using the same numbering system as used on your placement machine.

3. When its time to change over to the next job, the cart is moved to the correct placement system, existing feeders on the assembler are moved to an unused shelf on the cart and the “prekitted” feeder set move from the numbered slots on the cart to the same number slot on the machine.

4. You can even dedicate on cart for use when removing the tape feeders from the previous job and another for the current set-up minimizing changeover time.

Panasonic BM Feeder Storage Cart | Panasonic BM Feeder Trolley

Panasonic BM Feeder Storage Cart | Panasonic BM Feeder Trolley

40PCS/LAYER, 2 LAYERS
Length 870MM *Width 700MM * Height 1100MM
Castors ：Four metal flexible castors
Maximum Storage Size 32mm
About 30 kg.

1.The main use of 30*30MM stainless steel
2. With four universal casters ( two of them with brake ), anti static chain Each 
3. Layer may be placed 40 pcs 8MM feeder
4. Appearance specifications: 800x600x1100mm 
5  Roots of the customer requirements for customized feeder placed cart 


Uses: For placing feeder,feeder preparation in advance,Feeder Turnover store,Increase productivity.

Widely used in SMT production workshop feeder turnover and placement,place smoothly,freedomto take put,random move or fixed.

Material: Using stainless steel material,architecture designed with high hardness square pass,the car body is light and strong,durable.Four 3-inch casters,two with brake,two activities,convenient to move;

Quality: Using the advanced welding technology welding,replace the traditional manual welding,Cut fine,welding without welding,neat,no burr,after  filled feeder the frame is not deformed,the whole firm,lightweight, strong, durable;


Technology:Steel die punch made feeder positioning plate, and have the same principle with SMT
FEEDER platform placed , to achieve a perfect position, the top use large circular, to avoid an acute angle, the design is divided into upper and lower two layers, after installed feeder solid appearance, with a grounding chain, effective anti-static;

Feeder car features:Feeder car made of stainless steel processing, the body strong, lightweight, durable, flexible, overall  feeder placement platform are used manual welding processes , install anti-static towline can be moved with brakes. Upper and lower levels, can be loaded with a total of 80 feeder. 

Widely used in SMT production workshop FEEDER turnover and placement, placement stable, to take place freely, greatly increasing the work productivity. Are made of stainless steel and aluminum production.