SMT Technology-SMT Equipment Facilitator

BGA Rework Station|SMT peripheral Equipment

1. Embedded industrial PC, Digital system setting, Three independent heating zones, Panasonic CCD camera system, HD touch screen conversational interface, PLC control, Multi-functional integrated control, Human structure design, Folding optical lens, Optional number, store and choose temperature profile.

2. Two operation modes in system: Auto/manual. Auto mode: auto soldering/desoldering bga with button. Manual mode: Manual up/down top head to soldering/desoldering bga with joysticks. Both modes combines with optical alignment and laser positioning to finish the process. Meanwhile, build-in vacuum can pick up bga chip conveniently.

3. Multi-functions: “fast positiong”, “holding temperature”, “pressure sensor”, “instant temperature analysis”, “voice warning before heating finish”, “HD visual optical alignment”, “High precise temperature control, high repair rate, high stability”, etc.

4. High precise k-type thermocouple closed-loop control and PID automatic temperature compensation system, with PLC and temperature module and intelligent control unit to enable precise temperature deviation on ±2℃. Meanwhile, external temperature measurement connector enables temperature diction and accurate analysis of real time temperature curve.

5. Laser positioning: help rapid place PCB on the center point, and with “5 points support position”, more convenient and accurate.

6. Movable universal fixture prevent pcb from damaged on fringe component, suitable for all kinds of pcb repairing.

7. High power LED light to ensure brightness for working, and with different size of magnet nozzles, titanium alloy material, easy replace and install, never deformation and rusty.

8. 6-8 segments temperature can be set for top heating and lower heating(up to 16 segments). 50,000 groups of temperature curves can be stored, which can number, modification and apply at any time according to different BGA. Curve analysis, setting and adjustment are also available on touch screen.

9. With Voice warning 5-10 seconds before heating finish: remind operator to pick up bga chip on time. After heating, cooling fan will work automatic, when temperature cool down to room temperature ( <45℃ ), cooling system will stop automatic to prevent the heater from aging.

10. CE certification approval. Double protection: Overheating guard + emergency stop function.

SMT solder Paste Mixer

1. Introduction

JOYSMT-806 The revolution of the centrifugal force generated by automatic paste mixer,the force produced by the rotation of the rotating shaft and the angle of 45 degrees,The tank is located in the upper end of the paste continuous downward movement,Located at the bottom of the pipe to the tank above the paste around the movement, the formation of a tornado funnel type stirring action, make a smooth paste mixing and softening, deaeration reach the proper viscosity after mixing paste has good wettability, diffusion uniformity, excellent printing effect, to achieve the best performance of reflow soldering when.Its characteristics are as follows:

A) Mixing does not require prior paste retreat of ice.
B) Special control circuit, mixing time and speed can be adjusted, easy to operate.
C) Paste 45 degrees rotation, along the axis direction, not attached to the tank cover paste.
D) Smooth running, low noise, with the natural temperature in the mixing process, the effect of removing bubbles.
E) Paste pot without opening the lid, convenient, safe, suitable for various packing paste pot clamp.
F) Without water, does not destroy the shape of tin.
G) Power single 220V, with a safety device, to ensure personal safety

2. Installation
A) Remove the packaging, read this manual carefully. His hands at the bottom of the host machine position mentioned host, in the right direction, and laid a solid stable host ground requirements.

B) Please check the use of the machine specifications (AC220V) and the voltage specifications of the city.

C) Open the lock, open the machine cover, hand clockwise revolution operation device and fixture should be more paste pot do corresponding rotation.

D) Confirm the power supply is correct and the power switch is in the position of off/ off.

E) As the quality of solder paste and refrigerated condition, adjust the panel time set to better mixing time.

F） To stop the operation of the machine, according to the power to open the key, stop and cancel the operation.

3. Matters need attention
It is strictly prohibited to work the operation in the case of opening the cover or the cover of the machine.,Production run after the machine to open the cover, must wait for the machine to completely stop and then open. There will be some shaking when the machine is moving.,So the machine must be placed in a stable and solid place.,If the machine runs once excessive abnormal intense vibration,Immediately turn off the power,After the machine stop running,then Open cover check, be excluded.

4. Device Parameter
Working voltage:AC220V(60HZ)40W
Running speed:the first times:1400RPM:the second times:400RPM
Size:410*410*490MM(W.D.H)
Net weight/gross weight:40KG/45KG
setting time:0.1-9.9 second ,adjust 0.1S per times.
10-30 second, adjust 1.0S per times

5. Operation-Step
Step1:.Open the lock catch and cover,then confirm
that do not has other things inner.
Step 2:take out the solder paste and counterpoise(500g)
Step 3: Put solder paste and counterpoise into pot.(Mark: If max two pots at the same time, it need to remove the counterpoise)

Step 4: please turn a around by hand ,confirm that do not impact each other. then close the cover and open power switch.

Step 5: Set the better maxing time,5 minute for reference (Mark: controller of time: H-hour,M-Minute, S-Second, it show 05M00, that is ok)

Step 6: Press the start key later, the working light will be lighting, then the solder paste mixer start to max the solder paste automatically until complete ,then step automatically.

Step 7:Mix completely later,press the start key and close the switch

6. Maintenance
The solder paste mixer is precise small machine, so that need to often do maintenance, extend lifetime.
A, Need to use fully enclosed bearing, Machine needs to be kept clean
B, Spin device belt non durable goods, If there is any damage to the timely replacement

7. Mark
If you need the mixing tank two solder paste at the same time, To confirm that its weight is roughly equal,The difference is not more than 50g,If you only need a pot of paste mix according to weight of solder paste to choose 500g counterpoise, Or with an empty scrap solder paste pot into the equivalent weight or other items when the balance weight.To stop the operation of the machine, according to the power to open the key, stop and cancel the operation.Operation to open the machine cover, this opportunity will automatically stop running, the upper cover is covered after executing mixing operation, do not need to press the power switch.

Panasonic CM202/CM402/CM602/CM88 Exchange feeder cart

Part No.:N610064416AA
Weight:170KG
1.Short lead time;
2.Quality guaranteed.
3.All size and model available.

Samsung unloader original used for smt pick and place machine

JOY TECHNOLOGY CO.,LIMITED can provide professional SMT automatic production line solution,
The company specializes in SMT chip mounter(New samsung: SM451 SM471 SM431 SM421,SM411 SM482 etc)

Samsung Placement Machine (second-hand： CP40L. CP40LV. CP45F. CP45FV. CP45FVneo).
YAMAHA SMT machine (YAMAHA Chip shooter).
JUKI chip mounter ,SIEMENS SMT machine ,
PANASONIC SMT Chip mounter,
FUJI second-hand SMT machine.

We are also supply printing machine,Point glue machine,
Reflow soldering,Wave soldering,Automatic plug-in machines,SAMSUNG SMT machine feida,

Accessories ,stencil printer,Reflow oven,flow welding,Panasert,AOI,X-ray,LED automatic die bonder etc,

For communication products manufacturers,LED display, lighting manufacturers.
SMT, AI materials processing, and other enterprises provide
required equipment or wiring scheme.

SAMSUNG pick and place Machine:SM421S,SM421,SM411,SM431,SLM100,SLM120,SM471,SM481 etc.
YAMAHA SMT machine:YS12,YS24,YS100,YG12,YG100RA,YV100X.
SIEMENS SMT shooter:D4,D2,D1,S20 25 27 50 60 ,F3,F4,F5
PANASONIC SMT equipment:CM402,CM602,NPM.
JUKI Chip shooter:KE2070,KE2080,KE2060,KE2050.
FUJI SMT mounter:CP6,CP642,CP643,CP742,CP842,XP241,QP341,QP242,IP3,IP2.
SANYO Automatic Mounter:TCM3000Z,TCM-X200.
I PULSE FV5530,7100.M1,M2,M3,M4
MIRAE MPS1010,MX100,MX200

NEW automatic plug-in machines, horizontal plug,
Vertical plug,Bulk LED plug,Reflow oven, wave soldering, domestic,
import have lead, lead-free reflow soldering. Wave soldering,
Other SMT related equipment:: AOI. X - ray testing equipment t.
Semi-automatic and fully automatic printing machine.

Automatic small Nozzle cleaner

Parameter :
Mounting nozzles For 0201-1608
Air supply More than 0.6Mpa clean compress air
Lotion Industry level water without ion or pure water
Efficiency of cleaning At most 12 nozzle once
Object Each high speed mounter
Power supply Different holders for various nozzle
Optional fittings Different holding for various nozzles

Dimension(mm) 450*450*410mm
Weight 25kg

Please inform the feeder is for which brand mounter.
Please inform part no. for spare parts of feeder or machine.

Feel free to contact me if any interesting!

JUKI IC Tray Holder

JUKI IC Tray Holder
Description:

1. Original Place: China
2. Part name Name: IC Tray
3. Size: 330X310
4. Weight: 4KG
5. packaging: Original Pack
6. MOQ: 1 piece
7. Used for JUKI

Please inform the feeder is for which brand mounter.
Please inform part no. for spare parts of feeder or machine.

Feel free to contact me if any interesting!

SMT PCB Conveyor machine

SMT Conveyor machine

PCB Plate Width：50-300mm Transmission
Guide Length：0.5meters-5meters
It can be ordered according to requirement
PCB Transportation Width：30-350mm
PCB Shipping Height：910±50mm
（It can be ordered according to requirement）
PCB Conveyor Direction：From left to right or right to left (optional)
PCB Traveling Speed：0-10000mm/min（Adjust as needed）
Track Length 1000mm：
（It can be ordered according to requirement）
Power： 220V 50Hz Power Consumption： About 80W
Net Weight： 55KG (one-meter)
Communication Interface：
A communication interface between the Into and out of board
Lighting, Process card placing frame, Inspection operation panel
(width 150mm/laying antistatic rubber)
Three Sensors (Into and out of board&intermediate stop, stop 1pcs)
PLC Control

If there is no matching size,we can supply customized product ,
Pls contact us directly!