Samsung CP40/CP45 Mother board A370VB J4801013A-R

Samsung CP40/CP45 Mother board A370VB J4801013A-R

Samsung CP40/CP45 Mother board A370VB J4801013A-R
Samsung CP45 PICK UP NOZZLE - 0.5/ 0.25 (CN030)
Samsung CP45 PICK UP NOZZLE - 0.75/ 0.38 (CN040)
Samsung CP45 PICK UP NOZZLE - 1.2/ 0.65 (CN065)
Samsung CP45 PICK UP NOZZLE - 2.2/ 1.4 (CN140)
Samsung CP45 PICK UP NOZZLE - 3.6/ 2.2 (CN220)
Samsung CP45 PICK UP NOZZLE - 6.2/ 4.0 (CN400N)
Samsung CP45 PICK UP NOZZLE - 9.0 / 7.5 (CN750)
Samsung CP45 PICK UP NOZZLE - 12.7/ 11.0 (CN1100)

samsung CP45 Vaccum Ejector
samsung CP45NEO CAMERA

SAMSUNG CP40 CP45 CP50 TRAY COVER BRACKET J7052596B
SAMSUNG CP40 CP45 CP50 DOUBLE UNION UWD06-04 J6711166A
SAMSUNG CP40 CP45 CP50 TEE FITTING KQ2T08-06 J6711145A
SAMSUNG CP40 CP45 CP50 MULTI CYLINDER GMC-13-29-VG1 J6701032A
SAMSUNG CP40 CP45 CP50 AIR CYLINDER WDDA40x30 J6701030A
SAMSUNG CP40 CP45 CP50 SENSOR DOG -L 0135-641041-P1 J2101767
SAMSUNG CP40 CP45 CP45NEO CP60 MONITOR S/T 59E/KOR J5301021A
SAMSUNG CP40 CP45 CP45NEO CP50 CIRCUIT BREAKER DEG-32B(30A) J1202403
SAMSUNG CP40 CP45 CP45NEO 55 CP50II CP55 VME CPU BOARD MVME 162PA-252SE J4809043A
SAMSUNG CP40 CP45 55 CP60 SM320 REGULATOR TAR4000-04 J6709012A
SAMSUNG CP40 CP45 CP50 STOPPER TOP-M J7053045D
SAMSUNG CP40 CP45 MOTHER BOARD A370VB J4801013A-R
SAMSUNG CP40 CP45 FDD J5102007
SAMSUNG CP40 CP45 E/F-CYLINDER BDAS 16x5-CS5TB2 J1301214
SAMSUNG CP40 CP45 GRAPHIC CARD NVIDIA GEFORCE2 MX200 32MB J4802012A
SAMSUNG CP40 CP45 GRAPHIC CARD NVIDIA GEFORCE2 MX200 32MB J4802011A
SAMSUNG CP40 CP45 HEX SUPPORT J1201033
SAMSUNG CP40 CP45 LOWER COVER J7155201B
SAMSUNG CP40 CP45 SENSOR DOG J7054090B
SAMSUNG CP40 CP45 WINDOW-REAR J7052297B
SAMSUNG CP40 CP45 MULTI CYLINDER J6701033C


CP40 CP45 MULTI CYLINDER J6701033B
SAMSUNG CP40 CP45 Monitor SAMTRON45B - J5301007A-R
SAMSUNG CP40 CP45 CPU BOARD MVME-162P-242E J4809028A
SAMSUNG CP40 CP45 MULTI CYLINDER 0134-662501. (WOOSUNG) J1301387
SAMSUNG CP40 CP45 SAFETY RELAY G9D-301 AC24V J1202435
SAMSUNG CP40 CP45 CONTROL KNOB 194L-HE6N-175I J1200200
SAMSUNG CP40 CP45 LOAD SWITCH. L3 (20A) 194E-E25-1753 J1200197
SAMSUNG CP40 CP45 VME BOOT ROM J1102006A
SAMSUNG CP40 CP40LV SERVO DRIVER (FULL) PY0A030T1N51P01 J3153017A
SAMSUNG CP40 CP33 CABLEVEYOR-X HSP 0450-3B-50R 14LINK J6102001A
SAMSUNG CP40 CP33 MOUSE 9 PIN 9 J5202010A-9PIN
SAMSUNG CP40 CP20DC S-2000 HEAD I/F COVER J7152010B
SAMSUNG CP40 CP20 CP50 COVER-SIDE MU J7052223C
SAMSUNG CP40 (CA-WA) HEXA SUPPORT M3x5(BOLT-NUT) J1200120
SAMSUNG CP40 Connection Camera Cable for Monitor J9090404A
SAMSUNG CP40 CABLE FOR CAMERA J9080403A
SAMSUNG CP40 QUAD ALIGN QSV EXTENSION CABLE ASSY( J9063005B-R
SAMSUNG CP40 REAR OP PANEL CABLE ASSY QA2-SB08 J9061444A
SAMSUNG CP40 COVER-L.F.L J7052014B J7052014B
SAMSUNG CP40 SCM2 LAHD WIDE M J4809020-R
SAMSUNG CP40 SENSOR AMP GJRF-N J1301709
SAMSUNG CP40 VACUUM FILTER VFE2 J1300300-I
SAMSUNG CP40 FIDUCIAL VISION BOARD ASSY J9099059C
SAMSUNG CP40 Connection Camera CABLE FOR CAMERA J9090403A
SAMSUNG CP40 CONV SOL CABLE ASSY J9075563A
SAMSUNG CP40 Mid Stage Ill cable ASSY J9061911A
SAMSUNG CP40 QA RSTEP COMM CABLE ASSY QA2-Q06-1 J9061881B
SAMSUNG CP40 QA POWER CABLE ASSY QA2-Q01-1 J9061876B
SAMSUNG CP40 REAR OP PANEL CABLE ASSY QA2-SB08 J9061823B
SAMSUNG CP40 R/Z DRV COMMAND CABLE ASSY QA2-VM10-1 J9061793B
SAMSUNG CP40 BARCODE EXT CABLE 2 CP40-IT-19 J9061702A
SAMSUNG CP40 ITIF SIGNAL CABLE 2 CP40-IT-08 J9061692A
SAMSUNG CP40 ITIF SIGNAL CABLE 1 CP40-IT-07 J9061691A
SAMSUNG CP40 TEACHING LIGHT SENSOR CABLE ASSY QA2-HD(40 J9061417B-AS
SAMSUNG CP40 CONV STEP MOTOR ASSY QA2-CD02 J9061415A
SAMSUNG CP40 R MOTOR POWER CABLE ASSY QA2-HD02-2 J9061361C-AS
SAMSUNG CP40 SUB HEAD X AXIS CABLE QA-SB01-2 J9061360C-AS
SAMSUNG CP40 DIGITAL ILL CONTROL CABLE ASSY QA2-IL03 J9061359C-AS
SAMSUNG CP40 DIGITAL ILL CONTROL CABLE QA2-IL03-1 J9061359B
SAMSUNG CP40 Z MOTOR ENCODER CABLE ASSY J9061358C-AS
SAMSUNG CP40 Z MOTOR ENC CABLE QA2-MD05-1 J9061358B-AS
SAMSUNG CP40 Z MOTOR POWER CABLE ASSY QA2-HD01-2 J9061357C-AS
SAMSUNG CP40 BAD MARK SENSOR CABLE ASSY HD07-1 J9061121B-AS
SAMSUNG CP40 X MOTOR POWER CABLE ASSY QA-MD03-2 J9061073C-AS
SAMSUNG CP40 X MOTOR ENCODER CABLE ASSY QA-MD01-2 J9061071C-AS
SAMSUNG CP40 R/Z DRV COMMAND CABLE ASSY CA-VM10 J9061024A
SAMSUNG CP40 VME AXIS(3) BOARD ASSY(SMD) J9060158A
SAMSUNG CP40 BOARD ASSY J9060073S
SAMSUNG CP40 COMPONENT ALIGNER ASSY J9059146A
Samsung CP40 SSA_35_VISION (UPWARD) CVOD 35mm J9059014D
Samsung CP40 SSA_45_VISION (UPWARD) CVOD 45mm J9059013D
Samsung CP40 HEAD ASSY CP-40 J9055025B
Samsung CP40 QA-WA CHANGE ASSY QA-WA J8100151A
Samsung CP40 CE TRAY COVER J7252039B
Samsung CP40 CLAMP SENSOR J7159010B
Samsung CP40 HOLDER J7159006C
Samsung CP40 BRACKET CAMERA J7159003F
Samsung CP40 MOTOR PULLEY-THETA J7155181B
Samsung CP40 NON-REFLECTING PAPER J7155016A
Samsung CP40 LASER MOUNT J7155013B
Samsung CP40 VISION BACK PLATE J7155012A
Samsung CP40 HARNESS PLATE J7154022G
Samsung CP40 STOPPER TOP-M J7053045B
Samsung CP40 BALL SPLINE ASSY CP-40 J7000784
Samsung CP40 QA GLASS Front J7000760(F)


Samsung CP40 QA GLASS REAR J7000760
Samsung CP40 DIFFUSER FILM WA GLASS J6756001A
Samsung CP40 WA GLASS REAR J6754002A
Samsung CP40 WA GLASS FRONT J6754001A
Samsung CP40 CYBER ALIGNER.SHELF PACK LAHD WIDE M J6751006A-R
Samsung CP40 TIMING BELT 278-2GT-6 J6602025A
Samsung CP40 USB BALL MOUSE NWS-5 J5202008A
Samsung CP40 VME CPU BOARD BATTERY J4309002A
Samsung CP40 SERVO DRIVER-Y (FULL) PY0A050T1FC1P01 J3153018A
Samsung CP40 AC SERVO MOTOR P20B10100DXS0JE J3108032A
Samsung CP40 VISION CABLE ASSY FID-P3 J2102059
Samsung CP40 MARKED PAD 0133-627030 J2101986
Samsung CP40 E/F SPRING 0135-641064 J2101787
Samsung CP40 STOP PIN 0135-641063 J2101786
Samsung CP40 ORIGIN PIN 0135-641062 J2101785
Samsung CP40 E/F ROD 0135-641059-P1 J2101782
Samsung CP40 SPRING 0133-621025-1M J2101247
Samsung CP40 QSP DSP BOARD J1301644-R
Samsung CP40 AREA SENSOR PJ-50A J1301615
Samsung CP40 FITTING PU6 J1301610
Samsung CP40 TEE FITTING KQT04-M5/PB4-M5 (PISCO) D/C J1301182
Samsung CP40 C-RING (SHAFT) DIA15 J1300419
Samsung CP40 BUTTOM HEAD CAP SCREW J1300144
Samsung CP40 TRANSFORMER 220/110V 6.2KVA J1202405

Samsung CP33 CP60 AIR PRESSURE SENSOR CABLE ASSY CV01-1 J2101145
Samsung CP33 CP50 EXTEND SPRING 0134-671012-1M J2101497
Samsung CP33 CP50 VME AXIS(2) BOARD ASSY(SMD) J9060159A
Samsung CP33 CP45F SENSOR Q23SN6D (BANNER) J1301539
Samsung CP33 CP45 CP55 STRAIGHT FITTING PC12-04 J1301184
Samsung CP33 CP45 CP50 DP20 SERVO MOTOR-X P30B06040DXS22 J1301358
Samsung CP33 CP45 FITTING KQ2L04-01/PL4-01 J1301442
Samsung CP33 CP40EC CP50 SPINDLE GUIDE CAP J7155023B J7155023B
Samsung CP33 CP40 DP20 LIGHT ASSY CAMERA LIGHT BOARD J9800774
Samsung CP33 CP40 DP20 MARK SENSOR FX-MR2 (SUNX) J1300628
Samsung CP33 CP40 CP60 CP63 DRIVER PMM-BD-4905-4 (SANYO) J1301292
Samsung CP33 CP40 CP50 SM320 CP55 MANIFOLD 0131-611008 J2100009
Samsung CP33 CP40 CP50 SM319 BALL BEARING 6803ZZ J1301687
Samsung CP33 CP40 CP50 DP20 SUB I/F BOARD ASSY J9800395
Samsung CP33 CP40 CP50 DP20 40 VISION BOARD REV 1.0 (40) J9060149A
Samsung CP33 CP40 CP50 DP20 DSP BOARD DSP BOARD REV 1.0 J9060051A
Samsung CP33 CP40 CP50 DP20 SUB I/F BOARD ASSY J9060026B
Samsung CP33 CP40 CP50 DP20 CONVEYOR I/F BOARD ASSY J9060024B
Samsung CP33 CP40 CP50 DP20 HEAD I/F BOARD ASSY J9060023B
Samsung CP33 CP40 CP50 DP20 VME I/O DPRAM Ver.2 BOARD ASSY J9060022B
Samsung CP33 CP40 CP50 DP20 CABLEVEYOR-X HSP 0450-3BN-50R 14LINK J6102011A
Samsung CP33 CP40 CP50 DP20 CONVERTOR DC/DC SC0305S J4401007A
Samsung CP33 CP40 CP50 DP20 PUSH SWITCH LA3B-M1T5B J3403015A
Samsung CP33 CP40 CP50 DP20 PUSH SWITCH LA3B-M1T5G J3403014A

If there is no matching model,pls contact us directly.

Samsung CP40 CP45 Mother board J4801013A-R J91701012A-AS

Samsung CP40 CP45 Mother board A370VB J4801013A-R  J91701012A-AS

PRODUCT NAME :Samsung main board card J4801013A  J91701012A-AS
MOTHER BOARD
PAST LIST     (PAST NO.)

J4801013A  J91701012A-AS
JOY TECHNOLOGY Co.,Limited can supply other smt parts：
Available Model：
SPECIFICATIONS         
J6602046A J6602025A J6601088A J6404006A
J6404004A J6404003A J6304004A J6102011A
J6049000550 J6006300650 J5103002A J5102004A
J5102002A J4901004 J48091062 J4809054A
J4809044A J4802011A J48011004A J4801013A
J3409025A J34031050A J3403085A J3403079A
J3212022A J32111003A J3211048A J3211015A
J3211015 J31531001A J3153034A J3153026A
J3153017A J3108022A J2500532 J2500524
J2500515 J2500513 J2500511 J2500479
J2500476 J2500476 J2500470 J2500469
J2500461 J2500460 J2500448


J2500446 J2500409 J2500408 J2500392
J2500365 J2500322 J2500321 J2500302
J2500274 J2500267 J2500243 J2500214
J2500212 J2500133 J2500127 J2500121
J2500104 J2500095 J2500068 J2500067
J2500062 J2500061 J2500040 J2500038
J2500032 J2500021 J2500020 J2500016
J2102082 J2101882 J2101819 J2101816
J2100407 J2100361 J2004129 J2004127


J2004126 J2004122 J20041211 J20041210
J1301684 J1301675 J1301666 J1301665
J1301664 J1301606 J1301510 J1301309
J1301292D J1301268 J1301222 J1301218
J1301217 J1301181 J1301177 J1301149
J1300995 J1300987 J1300984 J1300886
J1300883 J1300748 J1300645 J1300641
J1300568 J1300550 J1300512 J1300497
J1300484 J1300093 J1202417 J1102006A

Samsung CP40 CP45 Mother board A370VB J4801013A-R J91701012A-AS
7155187D AM03-004562 J7265152A J90831195B
J90651471A CX 1032 P1000004 P1000023
J90650160C-AS J90600367E AM03-001738A J70531032A
AM03-005340A AM03-007498A AM03-008311A CD05-000028
EP06-000282 J31531050A J90650157B J9065211A
J9083184A J91741042A J91741044B J91741071A
J91741357A MC05-900071 J71551326C J72650152D
J3104013A J9080120C_AS EP06-000282 MC05-900105
MC05-900068 J91741012A EP12-000044A J66021200A
J70531997A J70660040B MC05-900191 J7055543A
J17358003B J90610233 J9061375 J90800711
J9061762 FWFD35301 FWEL00301 J66021016


J66020246 J90601023 90551171 J6409008A
J2102000
SD030-C0309898-01141804 MC05-000276 M1000000922
J2100085 SY3000-52-1A J6711170 J1301364
J1301142 J1300280 J611054 J1301188
J13006200 J6711133 J1200261 J1301695
J16709006 J3153057A J7054266A PY050A1FC1PQ1
J7054266A SE-00241 RGH22 X50D00 J32110195
J1300503 J1300504 J2102235 J2100130
J7054044 J7054118 J9080619 J9061358
J9061219 J2500275 J7154107 J71533184
J3403041 J1202401 J6754002A J1301176
J6711175A J6709006A J6709006A J6707003
J6707003 J7154026C J7154026C J90831738B
J9080795C J9080745B J9080712A J9080340A
J9080115A J9080066A J9061962A-AS J9061415C

Samsung CP40 CP45 Mother board A370VB J4801013A-R J91701012A-AS
J81001564A J9065197A J7159301C J1202001
J81001338A J7154043A J70531772A J70531773A
J1301567 J81001452A J7053115A J7154262A
J6119002A J1301049 J7154042A J1300068
J1300746 J81001337A J3409025A J7155201FJ67191056A
J2000270 J6601124A J7154043AJ70521031B J70521031B


J70531112A J70531488A J70531114A J70531076A
J70531777A J70531487A J6119005A J6119003A
J7154018A J7055534A J7055543A J7054101D-AS
J70531072B J81001144A J7155459C J70652200B
J70531489A J34061007A J71551014A J70531111A
J1300638 FC29-000043 J70531107A J70531073B
J71531383A J81001854A J70653494A J7055204A
J6711052A J70531505A J7055151A J7070051A
J70521032B J70651378E J7155472B J7255082A


J70531771A J70531780A J7055557A J71551334A
J71531199A J70531778A J71531231A FC29-001310A
J7155509A J71551438A J70531506A J70551430A
J7055155A J81001294A J70531779A J7153329A
J6711048A J81001866A J6404001A J7155167A
J70590095B J7155250B J7055544A J210943
J7053684A J1301641 J7053686A J2500279
J7153373A J70531776A J7154265A J6107005A
J6619036A J7155532A J6049000550 J70521059A
J7159295D J7155513B J7253009B J7154098B
J2500032 J7061074B J70571023A J90550133D
J90550133D J90551006A J9055318A J44011001C
J81001098A PSPCE-P00-051 J4401006A T-50C
SJ1225HA2 J3105019A J3105008A CD05-000014


A50933-003 1123HA1 GTH-22 EP06-901007
J81001215A J81001238A J81001216A J81001217A
4A250VAC J51031008A J2901009A JR28-25
J3501004A K3FK FST2501024I J9072126A
J54011003A J54011021A CD03-000026 J5102002A9
J35010400A J4401036A AM03-010389F STW420-ABDD
RGH22X50D00A J9055050A-AS AM03-004013A J71551891A
J90551225A-AS MC13-000124 J7000784-AS J7055542B-AS


J90833794A J90831036C J90833796A J90831308A
J90834319A J9061357A-AS J90831032D J90833626B
J90831264B J90831378F J90834527A J90831261D
J90831268B J90831376A J90831855B J90831028C
J90832889A J90831119B J9008334A J17254002B
J90831119A J55021002A J90832899B J90832897A
J90831434A J90831318C J90832906A J9083109A
J90832898B J9080757B AM03-013776A J9080696A
J81001339A J9080334B J9061762A J9080342A
"J81001074A  EP19-900417" J0653228A J9063006B
J90833323A J90831379B J90831105D J90831853A


J90551171A ￥5,510.00 J7055183C-AS J90830190B
CWT-400BDP J4401017A J4402023A J44011006A
VSF200-05 UP400S24 J36031009A J3603020A
SSR-25XW SV004iC5-2 J3152013A M06-6053
M06-8021 M08-8002 J81001118A J31531003A
EP06-900150 EP06-000040A J91741272A J3153046A
J9060109B J3152008A J81002052A J1300543
J1300544 EP06-900081 J1300546 MADHT1505E


J91851082A J9059076A AM03-001506 J6711006A
J6751009A J6751011A J9083161A AM03-001506A
J90571074A VCC-G20E20ST VCC-G20E20ST VCC-G20S20A
J9059140A J90591016A J91741051A J3153033A
J9060097A J90591002A J90891016A J90831108A
J9080346D J990800109C-AS J9083006B_AS J9080039A
J9083197A J9083082B J9080794A J9083006B
J908310333B J90833075A J90831101A J9061227A
J90833111A J90832905A J90833322A J90833075A

SMT Samsung FW-1 CP IC Tray Feeder

SMT Samsung FW-1 CP IC Tray Feeder

SAMSUNG CP IC TRAY FEEDER

SMT Samsung FW-1 CP IC Tray Feeder

Place of Origin: South Korea

Brand Name: SAMSUNG

Model Number: Samsung CP feeder

SMT Samsung FW-1 CP IC Tray Feeder SAMSUNG VACUUM SENSOR vacuum sensor BOARD ASSY VACUUM BOARD J9060080A

SAMSUNG COMPLIANCE ASSY J9055020A

SAMSUNG COMPLANCE ASSY J9055001A

SAMSUNG PUSHER pusher J7255006A

SAMSUNG CE TRAY COVER (ESD) J7252086A

SAMSUNG ACRYL COVER-REAR (ESD) acrylic cover J7252085A

SAMSUNG CE WINDOW-FRONT (ESD) J7252082A

SAMSUNG REEL SPACER reel padded TF08-Q125 J7065479B

SAMSUNG FN-14 J7055336A

SAMSUNG FN-08 J7055335A

SAMSUNG FN-05 J7055334A

SAMSUNG AIR TUBE air tube (POLYURETHANE) TU0604B J6713030A

SAMSUNG AIR TUBE air tube (POLYURETHANE) TU0805B J6713027A

SAMSUNG AIR TUBE air tube UB1065B J6713013A

SAMSUNG BALL SPLINE spline ball spline UNIT Z-AXIS J6611008A

SAMSUNG HEX SUPPORT M3x6 J6103028A

SAMSUNG SOCKET SET SCREW M8x10 (SUS) J6010801050

SAMSUNG M3x20MM SCREW J6001302036

SAMSUNG SOCKET HEAD CAP SCREW M3x12 (SUS) J6001301250

SAMSUNG SOCKET HEAD CAP SCREW M3x10 (SUS) J6001301050

SAMSUNG LED PCB D SMD ASSY LED PCB D (SMD TYPE) J4109030A

SAMSUNG LED PCB C SMD ASSY LED PCB C (SMD TYPE) J4109028A

SAMSUNG P-Z34 COMMAND CABLE ASSY MK-VM10-Q J9075977A

SM tray feeder for SM482/SM481/SM451/SM431/SM421/SM411/SM320/SM310/SM321

The SM tray feeder size only is 300*345*150MM

Samsung SM tray feeder for SM482/SM481/SM451/

SM431/SM421/SM411/SM320/SM310/SM321

The development of SMT Nozzle technology

The development of SMT Nozzle technology

Although the SMT nozzle technology has been developed for many years, has been able to meet the needs of the placement of production, but because of 0201 and 01005 small component applications, nozzle smaller and smaller to bring new challenges to the processing. Now the commonly used nozzle material and processing methods are not impeccable: for example, diamond head nozzle is not a real diamond, but a complex mixture of diamonds and metals, it is too expensive and easy to crack and broken; zirconia nozzle Expensive, but not the metal material hard, and the use of improper easy to break and lobes; PVD coated nozzle in the coating process to withstand a considerable heat, the need for strict cleaning process, especially when the nozzle is a small hole, Improper coating can cause clogging holes; tool steel is not only difficult to process and  expensive.

In fact, the nozzle needs a high wear-resistant part of the nozzle and the nozzle is only the end of the contact, the use of easy processing and low cost of materials, the end of the surface treatment is to solve the nozzle of the important ideas, and application materials and Processing methods and testing methods is the key technology; now use this way the nozzle products have come out.

This nozzle is made of aluminum alloy as the nozzle base, in the end of an electrophoretic ceramic molding technology used for surface treatment and made, as shown in Figure d. Electrophoretic Forming uses ceramic oxidized particles to charge in the electric field to form a higher dense layer. Since this layer is a tightly packed structure, this method can form low-defective ceramics on complex surfaces. Electrophoretic ceramic molding patented technology in a few minutes in the processing of aluminum alloy nozzle tip to produce more than ten microns thick ceramic uniform deposition layer, and good combination with the aluminum alloy.

This kind of aluminum alloy ceramic nozzle through the scanning electron microscopy microstructure inspection and a variety of performance testing, that is a very cost-effective products, in the wear resistance, surface quality, anti-blocking, color and nozzle life are To achieve a satisfactory level, and in the actual test, the simulation completed 3 million times after contact, with the scanning electron microscope to observe the nozzle did not find significant wear and damage; in the middle of the production plant for more than 18 months The test shows excellent performance and no failure occurs.

The following figure is a comparison of several different material nozzle .

Optimization case of abreast smt nozzle style placement machine

Optimization case of abreast smt nozzle style placement machine 

1.SMT Feeder position considerations: For abreast nozzle of placement machine feeder position is slightly different from the turret style,

The arrangement principle is as follows:

(1) The classification is based on components, the same type of components is arranged together, as far as possible to achieve simultaneous sampling. Side-by-side nozzle, between the two nozzles have a fixed distance (such as GSM is 20mm width), this distance is just with the station 8 mm feeder is equal, in order to save the picking time, the best way is to patch the first nozzle at the same time to absorb the components, such as less than 12 mm components are arranged together, 16 mm components are arranged together, greater than 20mm Of the components are arranged together.

(2) The same type of components placed in the order on the feeder, should first place the most components of the number of components, followed by the placement of a relatively large number of components, and finally placed fewer components components. Components placed as much as possible to patch position The placement of the material and the placement of the total travel the shortest principle, such as the placement of the location of the central part of the board, the feeder position is preferentially installed in the middle of the printed circuit board near the middle of the station, you can save the head back and forth moving time. In addition, for the board to install a larger number of components, in order to save time to pick up a feeder can be changed to a number of feeder, while picking, while the same time, Extend the refueling time, save machine downtime.

(3) it will be placed in the placement of the components are not far apart, the placement of the patch to reduce the moving distance.

2. Programming considerations.
(1) Minimize the number of nozzle replacements. The components are arranged in the same type, and the nozzle can draw such components at the same time. When the type of suction nozzle is completed, replace the next nozzle type and avoid frequent replacement of the nozzle. When more than one make-up placement programming, you can make the puzzle expansion as a whole board placement, reduce the number of nozzle replacement.

(2) To reduce the loading and unloading head before and after the material to move back and forth distance in the element reclaiming material, as far as possible in the machine for a feeding platform for material, such as only in the back of the material station to take, to avoid before and after the material caused by the increase in moving time .

(3) To Consider the ccd camera ,and the general placement machine has two sets of cameras, the first group installed in the patch head, the components picked up, the patch head in the process of moving to complete the flight identification to the middle of time, The camera is usually handled with components smaller than a certain size, for example, less than 20mm. The second group is mounted on a part of the machine and the suction nozzle picks up the components and needs to be identified on the camera. This will take part of the movement time , Usually this type of camera to identify the larger high-precision components, such as more than 20mm components. In programming, try to make multiple nozzles to pick up, identify and mount at the same time as far as possible not to absorb the need for two kinds of camera identification components , To spend more time to identify the entire placement of the head to wait for all the nozzle to complete, to absorb the next set of components.

(4) Tray discs to consider. General multi-function machines, all with a number of waffle Tray disk. Mounter is usually a Tray disk to move to the patch picking position, after drawing components, and then replace another Tray disk , Because Tray mobile replacement speed is slower than the placement speed, multi-nozzle side by side patch, if the adsorption components did not reach all, need to wait for the arrival of the next Tray disk components, so a waste of time. Programming should be considered, in the replacement Tray Disk time, patch head do not have to wait, to install other components, and then go to absorb  ic tray components.

How to avoid SMT Nozzle will be blown away?

How to avoid SMT Nozzle will be  blown away?

Is there any problem with smt Nozzle being collided in normal operations? So how to  avoid smt  Nozzle will be flying out? 

The solution is as follows：

1) SMT feeder did not install the case, the operator also manually adjusted the fly off the shift, the results close to the feeder problems need to be re-installed .

2) The operator needs to strengthen the training process.

3) check the height of the rail, it is possible to block part of the screw did not lock the floating high.

4) view the next alarm records, PT and the machine can see, you get the parameters of the material to be set correctly, Nozzle play with the order of the patch does not matter!

Above situation is the problem summary for SMT Nozzle .

General Knowledge of SMT Technology

General Knowledge of SMT Technology 

1. SMT full name is Surface mount (or mounting) technology, the Chinese means for the surface adhesion (or placement) technology.

2. In general, SMT workshop temperature of 25 ± 3 ℃.

3. Paste
(1) Paste printing, the required preparation of materials and tools Paste, steel plate, scraper, clean paper, clean paper, cleaning agent .
(2) Paste Ingredients include: metal powder, dissolved, flux, anti-flood agent, active agent, the main component of tin powder and flux, the volume ratio of about 1: 1, the weight ratio   
(3) flux in the constant temperature area began to carry out chemical cleaning action. flux in the welding of the main role is to remove the oxide ﹑ destruction of molten tin surface tension to prevent re-oxidation. Rosin-based flux can be divided into four types: R ﹑ RA ﹑ RSA ﹑ RMA.
(4)lead solder Sn / Pb ratio of 63/37, the melting point of 217 ℃. Lead-free solder Sn / Ag / Cu is 96.5 / 3.0 / 0.5, the melting point of 217 ℃.
(5)Paste removed from the refrigerator in Kaifeng use, must go through two important processes back to gentle mixing. The purpose of the temperature is to let the temperature of the cold paste back to room temperature, to facilitate printing. If you do not return to the temperature in the PCB into the reflow after easy to produce tin beads.
(6）Paste access principle is first-in first out.
(7）currently on the market selling solder paste, the actual only 4 hours of sticky time.

4. steel mesh
(1) steel mesh common production methods: etching, laser, electroforming.
(2) Commonly used SMT steel mesh material for the stainless steel. The thickness is 0.15 mm (or 0.12 mm).
(3) SMT general steel mesh openings than the PCB PAD small 4um can prevent the phenomenon of poor solder ball.

5.PCB
(1) often used PCB material FR-4.
(2) PCB vacuum packaging is the purpose of dust and moisture.
(3) PCB warpage specifications do not exceed 0.7% of its diagonal.

6.components
commonly used passive components (Passive Devices) are: resistors, capacitors, inductors, diodes, and so on, and these components are used to pick up the nozzle suction nozzle, referred to as the nozzle or suction nozzle. active components (Active Devices are: transistors, ICs, etc.
components of the control box relative humidity and humidity <10%.
 After the unpacking of the MD, the humidity on the card indicates that the IC is moisture and hygroscopic if it is greater than 30%

7. heating furnace
Reflow furnace temperature curve of the curve of the maximum temperature of 215 ℃ the most appropriate.
tin furnace test, the tin furnace temperature 245 ℃ more appropriate.
RSS curve for the temperature → constant temperature → return → cooling curve. ideal cooling zone curve and the return curve curve mirror relationship.

8. patch red plastic
SMT patch red plastic is a poly-thin compounds, and solder paste is different from its heat after curing, the freezing point temperature of 150 ℃, then, red plastic from the paste directly into a solid body.
SMT patch red plastic with viscosity flow, temperature characteristics, wetting characteristics. According to this feature of red plastic, so in the production, the use of red plastic is to make the parts firmly attached to the PCB surface, to prevent its fall.

For use on presses or dispensers:
① To keep the quality of the patch glue, please store in the refrigerator (5 ± 3 ℃) storage.
② from the refrigerator before use, should be placed at room temperature back to temperature 2 to 3 hours.
③ You can use toluene or ethyl acetate to clean the hose.

Dispensing:
① in the point of the hose to join the plug, you can get a more stable dispensing volume.
② recommended dispensing temperature of 30-35 ℃.
③ When dispensing the hose, please use a special glue sub-machine to separate, to prevent the glue into the glue.

Scraper: Recommended scraping temperature of 30-35 ℃ Note: red plastic removed from the cold environment, before reaching room temperature can not be used.
To avoid contamination of the original product, do not use any of the patch of plastic back into the original packaging.